Living Willow Fedge Kit

Product description

The kit contains everything you need to make a living willow fedge 1- 10 mtrs.

Each kit contains;

• Willow for the main rods/uprights
• Willow for weaving/lattice rods
• Willow for supporting/banding
• Willow for tying
• Weed mat
• Pegs
• Flexi-Tie (as an alternative to using willow)

Our kits are suitable for all ages and are highly disease-resistant. The fedge can be up to 6ft high (simply adjust if you require a lower height). 

Assembly instructions included.

1 mtr kit contains 8 pegs with 8sq mtrs of matting and 1 roll of flextie.

2 mtr kit contains 12 pegs with 16sq mtrs of matting and 1 roll of flextie.

3 mtr kit contains 16 pegs with 24sq mtrs of matting and 1 roll of flextie.

4 mtr kit contains 20 pegs with 32sq mtrs of matting and 1 roll of flextie.

6 mtr kit contains 28 pegs with 12sq mtrs of matting and 1 roll of flextie.

8 mtr kit contains 36 pegs with 64sq mtrs of matting and 1 roll of flextie.

10 mtr kit contains 44 pegs with 80sq mtrs of matting and 1 roll of flextie.

WILLOW MUST BE UNWRAPPED AND PLACE THE THICK (BUTT) END IN AROUND 10 INCHES OF WATER IMMEDIATELY UPON ARRIVAL.

IF THE WILLOW IS ALREADY SHOWING ROOTS, DO NOT CUT THE BUTT END BEFORE PLACING THE ROD IN WATER, AND BE CAREFUL NOT TO DAMAGE THE ROOTS.

IF THE WILLOW IS WITHOUT ROOTS, CUT OFF AROUND 3 INCHES FROM THE THICK BUTT END BEFORE PLACING THE ROD IN WATER.

If you would like a kit without the matting, flexi-tie and pegs, please see the link below.

Help & Advice